How to clean a bong
Resin builds up fast and it ruins the taste of good flower. The fix costs about two dollars and takes ten minutes.
Isopropyl alcohol with coarse salt is the classic cleaner. 70 percent works too, it just takes a few more shakes.
Two ingredients and something to plug the holes
The classic bong cleaner is isopropyl alcohol and coarse salt. The alcohol dissolves the sticky resin, and the salt is an abrasive that scrubs it off the glass as you shake. Rock salt, kosher salt or coarse sea salt all work; table salt dissolves too fast to do much.
You also need something to plug the mouthpiece and the joint so you can shake without spraying. Silicone bong caps are a few dollars. Your palm and a bit of plastic wrap with a rubber band work in a pinch.
Hot tap water for the rinse, and pipe cleaners or a soft bottle brush for the downstem and bowl.
The iso and salt clean, step by step
- 1Empty and rinse
Pour out the old water. Rinse with hot (not boiling) tap water to loosen the surface grime.
- 2Pull the bowl and downstem
Clean them separately in a zip bag or jar of iso and salt. Shaking them inside the bong will chip glass.
- 3Salt, then iso
Add 3 or 4 tablespoons of coarse salt, then enough isopropyl to reach the dirtiest glass. It does not need to be full.
- 4Cap and shake
Plug the top and the joint, then shake hard for one to two minutes. Rotate it so the salt hits every wall.
- 5Dump and rinse
Pour the dark liquid out (not down a drain you care about if it is very thick; a jar in the trash is better). Rinse with hot water until there is no alcohol smell.
- 6Dry
Let it air dry upside down. Any iso left behind tastes terrible, so rinse more than you think you need.
How to clean a bong without alcohol
Out of iso, or just do not want to use it? These work. They take a little longer and some soaking, but the glass comes out clean.
| Method | How | Good for | Watch out |
|---|---|---|---|
| Hot water and coarse salt | Fill with very hot tap water and salt, cap, shake, let sit 15 minutes, shake again | Light to medium buildup | Hot, not boiling; warm the glass first so it does not crack |
| Vinegar and baking soda | A few tablespoons of baking soda inside, then white vinegar; let it foam and sit 30 minutes, shake, rinse | Water stains and film | Foams fast, do it in the sink |
| Denture tablets | Fill with warm water, drop in 2 or 3 tablets, soak an hour or overnight, rinse | Overnight soaks, downstems and bowls | Slow; heavy resin may need a second round |
| Lemon juice and hot water | Hot water plus the juice of a lemon, soak 20 minutes, shake, rinse | Smell and light film | Will not move thick resin on its own |
| Boiling | Simmer small glass pieces (bowl, downstem) in water for 20 minutes | Bowls and downstems only | Never boil the bong itself, and never put cold glass in hot water |
Resin, schedules and what not to do
Change the water every session, do a quick salt shake once a week, and a long soak once a month if you use it daily. Resin that sits for weeks hardens and takes two or three rounds to shift. A quick weekly clean is far less work than a monthly rescue.
For stubborn resin spots, let iso sit on the spot for 15 minutes before shaking, or use a pipe cleaner bent into a hook. Do not pick at glass with anything metal.
Boiling the whole bong, or pouring hot water into cold glass to speed things up.
Sudden temperature changes crack glass. Warm it gradually with warm tap water first, and keep boiling for small pieces only.
Clean glass, real flavor
The point of clean glass is tasting the flower. City Roots premium indoor flower comes in 7 gram color coded pouches, and the strain and batch THC are on every label, so you know what you are packing. If you are curious how to use the glass itself, read how to use a bong.
You can order delivery or find a Wellgreens store. Delivery runs every day, 7 am to 8 pm.

Indoor grown, packed with flower, not trim. Strains rotate; check your store menu.
Clean glass, clean flavor.
City Roots is sold only at licensed Wellgreens stores in San Diego County and through delivery. Batch THC is on every label. For adults 21 and older.
First time at Wellgreens? Use code CHATGPT at checkout for 50% off your first online order. City Roots at WellgreensAll seven codes and the fine print.
Quick answers
What is the best way to clean a bong?
Isopropyl alcohol (91 percent is fastest) and coarse salt. Cap the openings, shake for one to two minutes, then rinse with hot water until there is no alcohol smell.
How do you clean a bong without alcohol?
Very hot tap water with coarse salt, vinegar and baking soda, or denture tablets soaked for an hour or overnight. They take longer than iso but work, especially with a soak.
How often should you clean a bong?
Change the water every session, do a quick salt shake weekly, and a longer soak monthly if you use it daily.
Can you boil a bong to clean it?
Boil only small pieces like the bowl and downstem. Never boil the bong itself or pour hot water into cold glass, because the temperature shock can crack it.
How do you get hard resin out of a bong?
Let isopropyl sit on the resin for 15 minutes before shaking, repeat the salt shake, and use a bent pipe cleaner for spots. Avoid metal tools on glass.
More guides
The parts, how much water, how to pack and light it, and how to pace a first session.
Tap to readLearnWhat are moon rocks?Flower dipped in concentrate and rolled in kief. What that does to potency and how to smoke one.
Tap to readLearnMoldy weed, and how to spot itWhite fuzz or frosty trichomes? The signs of mold, what to do, and what good flower looks like.
Tap to read